DEMO You're viewing an interactive demo of the 3D Vision Metrology & Dimensional Analysis platform. Scene data and measurements below are synthetic, generated to illustrate the workflow. ← Back to Polytope Networks

Depth Inspection — live scan

Polytope Vision Core · Polytope Depth Model fusion
Press brake station on the shop floor Depth map overlay
FUSED · Polytope Vision Core + Depth Model · 118.4k pts
ModeVision Core+Depth
Scalex1.284
Voxels118.4k
Feature420 pts
Range0.8-11.4m
NEAR
FAR
Fused Depth Scan
118.4k voxels · Polytope Depth Model ready · press brake station 04
Capture mode
62%
Depth zones detected
Machine bed / near field0.8-1.9 m
Backgauge & work table1.9-3.4 m
Press brake frame3.4-5.6 m
Trolley lane5.6-8.2 m
Aisle / far bay8.2-11.4 m

Surface inspection report — press brake station 04

REVIEW REQUIRED
Scan mode
Fused
Surface pts
118.4k
Checks run
6
Flagged
2
Inspection checkMeasuredToleranceResult
Work table flatness0.6 mm< 1.5 mmPASS
Backgauge parallelism1.1 mm< 1.5 mmPASS
Die alignment (die seat)2.4 mm< 1.5 mmREVIEW
Sheet seating gap0.9 mm< 2.0 mmPASS
Aisle clearance (egress)1.42 m> 1.20 mPASS
Obstruction in ram traveldetectednoneREVIEW
Demo page — figures are illustrative and generated for demonstration purposes only. Depth field is produced by Polytope Depth Model inference on this frame; tolerance values are placeholders pending calibration against reference geometry on site.