Manufacturing · Quality inspection
3D Vision Metrology & Dimensional Analysis
Turn any camera into a measurement instrument.
The problem
Contact probes and spot checks measure only a few points on a part and take time. 3D Vision Metrology reconstructs the full surface from camera captures and compares it with your CAD reference, so out-of-tolerance conditions are found early.
How it works
- 1
Cameras at your site
Cameras installed at your premises capture the operation.
- 2
AI runs on the edge
Models run on NVIDIA Jetson edge devices on-site, so your video never leaves the premises.
- 3
Results reach your systems
Reports and alerts connect to your ERP and billing.
Modules
3D Reconstruction
Capture a physical object from multiple angles and reconstruct it as a dense 3D model in real time.
- Full-surface inspection instead of spot checks at sampled points
- Real-time dense 3D model generation from multi-angle capture
- No contact probes or manual measurement required
Point Cloud Processing
Raw multi-camera captures are cleaned, aligned and turned into measurement-ready geometry.
- Dense point cloud generation from multi-camera capture
- Automated noise filtering and alignment
- Scales from single parts to full assemblies
CAD Comparison
The as-built 3D reconstruction is compared directly against CAD reference geometry.
- Direct as-built vs. CAD reference comparison
- Works with existing CAD files — no new baseline required
- Highlights geometric drift from design intent
Deviation Mapping
Every deviation is surfaced automatically and flagged against tolerance bands, not eyeballed.
- Deviations flagged against tolerance bands, not eyeballed
- Colour-mapped deviation visualisation across the full surface
- Catches out-of-tolerance conditions manual checks would miss
Automated Reporting
An inspection report is generated automatically from every scan.
- Every measurement traceable to a timestamped, exportable report
- Inspection reports generated without manual write-up
- Audit-ready documentation for every part inspected
Edge Inference
Reconstruction and comparison run on-premises, on-site, at the point of capture.
- Runs on-premises — geometry data never leaves the plant
- No cloud dependency for sensitive part geometry
- Low-latency inference suited to shop-floor conditions
Hardware
Multi-camera capture rig or handheld scanning support; runs on-premises.
Privacy
Part geometry is processed on-premises and never leaves the plant.